Qwik Products
Qwik-Products - QT6104 Qwik Swap V3
$298.00
$330.00
$298.00
$330.00you save $32.00
QwikSwap™ is a money saving solution to replacement of a failed OEM Constant Torque ECM, X13® or SelecTech® Motor while adding performance improving variable blower speed control. Use QwikSwap™ with a Permanent Split Capacitor (PSC) Motor to replace the failed ECM blower motor!
QwikSwap™ V3 (QT6104) provides replacement of a failed OEM Variable Air Flow Rate ECM 2.0. 2.3, 2.5 or 3.0 motor with a Permanent Split Capacitor (PSC) motor while maintaining variable blower air flow capability. As with any QwikSwap, installation simply requires moving wires from the failed ECM motor to the QwikSwap™ V3 board, then connecting the new PSC motor’s common and the three power leads (one for each speed) to the QwikSwap™ V3 board (along with a capacitor).
Features
Work with optional Humidity Sensor (QT6001) for enhanced humidity removal
Provides Variable Blower Air Flow
Fast Replacement (no programming required)
Provides improved humidity removal compared to fixed-speed operation
Automatically select the optimum PSC motor blower speed (Low, Medium or High) every time the unit cycles on
Low-Cost
Robust Alternative to Expensive Unreliable ECM Motors
Maximum Blower 1 Hp
Maximum Steady-State Current 20 Amps
Motor Voltage 115 VAC or 240 VAC,
Frequency 50 - 60 Hz
Replaces Communicating motors (Emerson, Nidec, US Motors)
Reusable
Color: Mostly Green
Equipped with 6,000 Amp, 100 Joules surge protection on all high voltage circuits
QwikSwap™ V3 (QT6104) provides replacement of a failed OEM Variable Air Flow Rate ECM 2.0. 2.3, 2.5 or 3.0 motor with a Permanent Split Capacitor (PSC) motor while maintaining variable blower air flow capability. As with any QwikSwap, installation simply requires moving wires from the failed ECM motor to the QwikSwap™ V3 board, then connecting the new PSC motor’s common and the three power leads (one for each speed) to the QwikSwap™ V3 board (along with a capacitor).
Features
Work with optional Humidity Sensor (QT6001) for enhanced humidity removal
Provides Variable Blower Air Flow
Fast Replacement (no programming required)
Provides improved humidity removal compared to fixed-speed operation
Automatically select the optimum PSC motor blower speed (Low, Medium or High) every time the unit cycles on
Low-Cost
Robust Alternative to Expensive Unreliable ECM Motors
Maximum Blower 1 Hp
Maximum Steady-State Current 20 Amps
Motor Voltage 115 VAC or 240 VAC,
Frequency 50 - 60 Hz
Replaces Communicating motors (Emerson, Nidec, US Motors)
Reusable
Color: Mostly Green
Equipped with 6,000 Amp, 100 Joules surge protection on all high voltage circuits